Ceramics 3D New Product Launch Conference for the Integrated Printing, Glue-Applying, and Sintering Furnace

Organized by: Tianjin Zhonghuan Electric Furnace Co., Ltd.

          Center for Rapid Manufacturing, Huazhong University of Science and Technology

Time: 2025 year 12 month 1 Evening 6:30 PM

Location: Haikou Luneng Hilton Hotel Meilan Hall   

On December 1, 2025, the “New Product Launch Conference for the Integrated Ceramic 3D Printing Degassing and Sintering Furnace,” co-hosted by Tianjin Zhonghuan Electric Furnace Co., Ltd. and the Rapid Manufacturing Center of Huazhong University of Science and Technology, was grandly held in Haikou, bringing together experts and scholars from across the country to jointly unveil the new product and discuss its future prospects.

On-site Registration

At the check-in area, we have prepared exquisite souvenirs to express our gratitude for the support and encouragement of all our guests.

Event Opening

As night fell, a dazzling spectacle unfolded, and the moment event host Sun Lan—Manager of the Central Electric Furnace Market Department—took the stage, the atmosphere in the venue instantly ignited with fervor.

Manager Sun stated in his speech that the new products unveiled at this launch event —The ceramic 3D-printing debinding-and-sintering integrated furnace is the fruit of university–industry collaboration! For more than three decades, Zhonghuan Electric Furnace has been deeply engaged in the industry, focusing on research and development services. From high-temperature sintering and thermal analysis to the 3D-printing equipment sector, every breakthrough has been made possible thanks to the support of our research partners. Zhonghuan Electric Furnace and Huazhong University of Science and Technology have jointly established a laboratory, and this integrated furnace is a major achievement resulting from that collaboration.

Expert Explanation

Figure 4 : Professor Wu Jiamin of Huazhong University of Science and Technology

At the press conference, the co-developer of the new product: Professor Wu Jiamin of Huazhong University of Science and Technology, Chair of the CICC Ceramic 3D Printing Division, shared the R&D journey and the core technologies. His brief address conveyed genuine sincerity and a strong sense of responsibility, resonating deeply with the online audience.

General Manager’s Address

Figure 5 : Mr. Zhang, General Manager of Zhonghuan Electric Furnace

Mr. Zhang, General Manager of Zhonghuan Electric Furnace, delivered a keynote address. On behalf of the company, he expressed gratitude for the longstanding support from customers across various sectors. He provided a brief overview of the joint development of products focused on high-temperature in-situ mechanics, visualized high-temperature deformation, and high-temperature contact angles, and extended a sincere invitation to deepen collaboration with industry leaders and esteemed academics. Mr. Zhang’s remarks not only highlighted Zhonghuan Electric Furnace’s profound technical expertise and robust capabilities but also ignited a shared sense of confidence and enthusiasm for co-creating a promising future.

Inauguration Ceremony

The press conference has reached the highly anticipated moment. —New product launch ceremony. The successful conclusion of this university-enterprise collaboration marks another expansion of Tianjin Zhonghuan Electric Furnace’s product portfolio. Add a member “Fierce general,” Ceramics 3D Printing Degassing and Sintering Integrated Furnace This product is now officially available for purchase.

Professor Wu Jiamin of Huazhong University of Science and Technology (left) and Mr. Zhang, General Manager of Tianjin Zhonghuan Electric Furnace (right), took the stage to unveil the new product.

New Product Introduction

The new products unveiled this time - Ceramics 3D Printing Degassing and Sintering Integrated Furnace , will Integrating the two core processes of debinding and high-temperature sintering, this system delivers end-to-end thermal processing—from green body to finished product—specifically designed to address the pain points of conventional manufacturing. The equipment features an integrated design that eliminates the need to transfer the green body, enabling complete debinding and sintering in a single operation and effectively preventing cracking, deformation, and contamination during handling. The furnace is constructed from high-quality, high-temperature-resistant materials with excellent thermal insulation, paired with advanced heating and temperature-control systems that precisely meet the thermal-processing requirements of various ceramic materials, including zirconia, alumina, silicon nitride, and ceramic slurries, thereby providing stable and reliable forming assurance for 3D-printed ceramic components.

Group photo for keeps

The event venue was graced by a distinguished gathering, and amid a vibrant atmosphere, several guests took to the stage to capture this precious moment of collaboration between the university and the enterprise!

General Manager Zhang and Professor Wu raised their glasses in a toast, expressing heartfelt gratitude for the strong support of all guests and distinguished experts and professors.

Shared Dinner

This event is not only a grand celebration to express gratitude for the launch of new products, but also a meaningful gathering that fosters consensus and deepens friendships, bringing this gala to a perfect close.

Looking ahead, the company will remain committed to aligning its research and development efforts with real-world industry needs, placing customer value at the core of everything we do. We will continuously enhance our product competitiveness and service quality, delivering even higher-quality instruments and services to sustainably empower China’s scientific innovation and industrial upgrading. We look forward to partnering with more collaborators to jointly usher in a new chapter in the field of scientific research.

The 14th International Conference on Advanced Ceramics

This press conference was held concurrently with the 14th International Conference on Advanced Ceramics, at the same venue. At the conference, numerous experts and scholars visited the Tianjin Zhonghuan booth to exchange ideas and engage in discussions. The booth attracted a steady stream of industry professionals and partners, creating a vibrant atmosphere of on-site inquiries and collaborative negotiations, which fully underscored Zhonghuan Electric Furnace’s brand influence and industry recognition in the field of materials-sintering research.

Professional Report

In addition, we also did The keynote report, “Applications of High-Temperature Visualization Equipment in the Field of Inorganic Materials,” presented case studies on the use of high-temperature visualization technology in ceramics and alloy materials.