[User Achievement] “Visualization” of the Sintering Process: Densification of MgF₂-Doped Transparent Alumina Ceramics

A research team led by Professor Wang Shiwei at the Shanghai Institute of Ceramics has published a paper in the Journal of the European Ceramic Society. This study successfully employed MgF₂ as a dual-function sintering aid to fabricate high-performance transparent alumina ceramics and, for the first time, systematically elucidated the synergistic mechanism between Mg²⁺ (which inhibits grain growth) and F⁻ (which promotes densification), thereby providing an innovative additive design strategy for optimizing the performance of transparent ceramics.

2026-03-30

[User Achievement] “Visualization” of the Sintering Process: Densification of MgF₂-Doped Transparent Alumina Ceramics

Tianjin Zhonghuan Electric Furnace   Tianjin Zhonghuan Electric Furnace Co., Ltd.

 

  March 6, 2026, 11:22  

Digital Object Identifier : 10.1016/ j.jeurceramsoc.2025.117547

The research team led by Professor Wang Shiwei at the Shanghai Institute of Ceramics has published a paper titled “Coupled roles of MgF2 additive on sintering of sub-micron alumina transparent ceramics” in the Journal of the European Ceramic Society. In this study, MgF₂ was successfully employed as a dual-function sintering aid to fabricate high-performance transparent alumina ceramics, and the synergistic mechanisms of Mg²⁺ (which inhibits grain growth) and F⁻ (which promotes densification) were systematically elucidated for the first time, thereby providing an innovative additive design strategy for optimizing the performance of transparent ceramics.

Part 0 1

 

Research Background

 

Transparent ceramics are used in applications such as armor windows and laser gain media due to their excellent mechanical properties, corrosion resistance, and thermal stability. Among them, polycrystalline alpha-Al 2 O 3 Ceramics exhibit high mechanical strength and excellent formability, and achieving high transmittance requires a pore-free microstructure with fine grain sizes. Traditional approaches primarily rely on cation doping to suppress grain growth, but they overlook the influence of anions. This study, for the first time, incorporates MgF 2 As a bifunctional additive in Al 2 O 3 Mechanism of action in ceramics.

Part 0 2

 

Experimental Method

 

1) Spontaneous Solidification Casting

2) Sintering: under an air atmosphere, 100°C/h Sintering was carried out at temperatures ranging from 1150°C to 1325°C, with a holding period of 2 hours. The thermal shrinkage rate of the alumina green body was optimized using a high-temperature deformation visual analyzer.

Part 0 3

 

Performance Section

 

Al₂O₃ ceramics doped with 500 ppm of MgF₂ exhibit the best overall performance:

1. Highest transmittance: At a wavelength of 640 nm, the linear transmittance reaches 61.6% (with thickness normalized to 0.8 mm).

2. Among the finest grains: average grain size approximately 0.40 μm.

3. Excellent mechanical properties: Vickers hardness of 21.8 GPa and fracture toughness of 2.73 MPa·m¹/².

Part 0 4

 

Research Conclusions

 

In this study, samples prepared at the optimal doping level of 500 ppm exhibit excellent performance. The researchers systematically investigated and quantified the densification and grain growth behaviors, and compared them with other dopants (spinel and AlF 3 ) for comparison. Among them, MgF 2 It exhibits dual functionality: cations predominantly govern the mechanism of grain growth inhibition, while anions promote densification.

 
 

Central Electric Furnace Equipment

Visualized High-Temperature Deformation Analyzer, Optical non-contact measurement is used to quantify the expansion and contraction of materials during the sintering process. During temperature cycling, changes in material shape, dimensions, and phase state are monitored online in real time, with intuitive and accurate data and graphical reports generated by an intelligent data acquisition and image-processing system. The product performance is comparable to that of international counterparts and ranks among the leading domestic offerings. This visual high-temperature deformation analyzer is employed in materials research and development as well as manufacturing, helping to precisely optimize sintering and heat-treatment processes, enhance product quality, and reduce production costs.

Main Functions

◆ High-Temperature Test: Maximum Operating Temperature 1600℃/2000℃

◆ Real-time dynamic measurement of shrinkage deformation during sintering: non-contact measurement and recording of the temperature-dependent curves for sample height, width, and area during the sintering process.

◆ Determine the characteristic temperatures: sintering point, softening point, spheroidization, hemispheroidization, and melting point.

Copyright Notice

The content published on this official account is intended solely for learning, exchange, and sharing; all rights remain with the original authors and their affiliated institutions. The views expressed in these posts reflect only the position of this official account, and we welcome constructive criticism and feedback from our readers. Should any infringement be identified, please contact our editorial team promptly so that appropriate action (deletion or modification) can be taken. Thank you for your understanding and support!

 

Submission Guidelines

We warmly welcome teachers from all fields to submit articles to this official account and share the latest research findings of their research groups. Those interested may contact us directly through the account’s private messaging feature.

Equipment Consultation Hotline: 15122725930

 
 
 
 
 

Previous Page